Simple Type Booster MPPT Solar Electric Vehicle Special Controller
48v 60v 72v
Simple type booster MPPT Solar Electric vehicle special controlleris a sophisticated solar charge controller family for low cost appl
ications.The electronic circui t is equipped with a microcontrol
ler that provides high-efficiency charging technology together with
a number of outstanding status display, warning and safety
functions.
Product Advantages:
1.High performance booster MPPT charging ways.
2. The system uses solar panel power supply, reduce the power
consumption of the battery.
3. The LED status indicator.
4. Digital tube current-time display charging current, battery
voltage, and solar energy input voltage, running status be clear at
a glance.
5.Complete over-charge, anti-recoil, anti-reverse, and short
circuit protection.
6. One-click set battery voltage grade (48V, 60V, 72V three battery
voltage grade easy one-click settings).
7. System USES a fool type design, easy to use, safe and reliable.
Technical parameters
PV open circuit voltage | 16V～50V | MPPT Voltage range | 16V～45V | MPPT efficiency | ≥99% | Efficiency | ≥95% | No-load loss | < 5mA | Solar input power | 18V200W,36V400W | Communication distance | ≥5m | Battery | 48Vor 60Vor 72V(One-click set) | Over-voltage protection | 48V-58V,60V-72V,72V-87V | 12VDC power | 6W | USB charge power | 5W | system reset | One-click reset | Anti-reverse protection | When the battery positive and negative reverse connection, the fuse
will fuse, the user to replace 10A, φ5×20 glass tube fuse. | Working temperature | -25℃ - +65℃； | Weight | 0.5Kg | Size | 115×111×43(mm) |
|
Product Advantages:
1. 12V 24V 48V system voltage auto identify.
2. MPPT charging efficiency more than 99.5%.
3. Fanless design with no nosie and free maintainless
4. With RS485 communication interface,more intelligent.
5. Support data storage, storage time can be up to 10 years.
6. Synchronous rectification technology.
7. Dual peaks and multi-peak tracking technology.
8.Japan imported power kits with better performance and more
durable.
9. Common cathode circuit design makes the system more stable and
reliable.
10. Support for parallel conenction, 99 sets max.
11.Super heat sink and fanless design with no nosie and free
maintenance-free.
Product Parameters:
| Parameters Name | The parameter values (and adjustable range) | Default values | | Current | 10A | 20A | 30A | 40A | | | System Voltage | 12V,24V,48V | | | Photovoltaic max input voltage | 20V～100V(12V system Voltage) 40V～150V(suggest lower than 145V)(24Vsystem Voltage) 80V～150V(suggest lower than 145V)(48Vsystem Voltage) | | | Rated working current | 10A | 20A | 30A | 40A | | | Photovoltaic max input power | 120W/12V 240W/24V 480W/48V | 240W/12V 480W/24V 960W/48V | 360W/12V 720W/24V 1440W/48V | 480W/12V 960W/24V 1920W/48V | | | Output Rated Current | 10A | 15A | 20A | 20A | | | MPPT efficiency | ﹥99.5% | | Conversion efficiency | ﹥96% | | | Over voltage (over charge) | 16～17V,×nV | 16V,×nV | | Over voltage recovery | 15～15.5V, ×nV | 15V,×nV | | Charging limit voltage | 15.5～16V, ×nV | 15.5V,×nV | | Equalizing charge voltage | 15～15.5V, ×nV | 15.2V,×nV | | Boost charge voltage | 14～15V, ×nV | 14.4V,×nV | | Boost charge recovery | 12.3～13.5V,×nV | 13.2V,×nV | | voltage | 13.2～14.0,×nV | 13.8V,×nV | | Over discharge voltage | 9.8～11.8V,×nV | 10.8V,×nV | | Over discharge recovery | 12.0～13.0V,×nV | 12.6V,×nV | | Equalizing charge time | 1/2/3 hour | 1H | | Boost charge time | 1/2/3 hour | 1H | | Device address | 1～99 | 6 | | Light control OPEN voltage | 5～11V | 5 | | Light control CLOSE voltage | 5～11V | 6 | Light control time delay | 10min | | | Temperature compensation | 0～4 | 4 | | Over temperature protection | When the temperature reaches 75 ℃ charging current is limited to
half of the rated current, When the temperature reaches 90 ℃
charging and load are shut off | | | Working temperature | -20℃～50℃ | | | Storage temperature | -40℃～80℃ | | | Humidity | 10% ～ 90% Non-condensate | | | Weight | 2.15kg | | | Size | 185*193*80mm(20～30A) | |
|
